IKO Kleje
IKO Kleje
Kleje są bardzo ważnym produktem mającym zastosowanie do gontów.
Kleje IKO pozwalają Ci pracować w wietrznych obszarach, na płaszczyznach o spadku większym niż 60 stopni oraz w zimniejszych warunkach klimatycznych.
Wszystkie kleje IKO są w 100% kompatybilne z gontami IKO.
Dane o produkcie
| Shingle Stick | Plastal | ||
| Kolor | Czarny | Czarny | |
| Gęstość w 20°C | ± 1,2 kg/l | ± 1,3 kg/l | |
| Czas schnięcia – RH 50–60 % | ± 24 h | ± 24 h | |
| Flash point | 41° C | 41° C | |
| Odporność na temperaturę | od – 20 do 80 °C | od – 20 do 80 °C | |
| Temperatura aplikacji | od 0 do 40 °C | od 0 do 40 °C | |
| Opakowanie | 310 ml (12 szt w kartonie) | 5 kg |
Pliki do pobrania
You would need mastics to ensure the waterproof tightness of your roof details at the rakes, flashings, valleys, windows,...
Although roof shingles are nailed, extra bituminous mastic should be added when roof shingles are installed in areas with a lot of wind
OR in winter time IKO also recommends to seal the roof shingles with extra bituminous mastic.
Beware not to use just any brand of bituminous mastic in combination with bitumen roof shingles.
Application instructions
Note that steep slope shingle application (> 60°) or application of shingles in high wind areas require extra IKO nails and hand sealing with IKO mastic.
During cold weather application of extra mastic must be added in the same manner.
In high wind areas the tabs of each roof shingle should be glued for at least the top five courses of the roof.
Bituminous mastic should be applied in amounts no greater than 25 mm in diameter and used sparingly.
Use of mastic during application
